16" x 6.50" Over Lug Design Simulator Set
8 Lugs, 4 Hand Holes
GM 2000-Current

16" x 6.50" Over Lug Design Simulator Set
8 Lugs, 4 Hand Holes
GM 2000-Current

Fits the following dual rear wheel vehicles:

2000 – Current GM New Body Style, Rim #29588 & 29361

16" x 6.50", 4 Hand Holes/Air Holes and 8 Lug Nuts

This set for use with the original GM Factory Hub Covers

One set includes:
2 Front Liners/Dishes
2 Rear Liners/Dishes
32 Black Plastic Lug Nut Covers

These are 304-Grade Stainless Steel. You just need soap and water to clean them up!

INSTALLATION INSTRUCTIONS:
Application applies to original equipment manufacturer’s standard production wheels only.
There is no need to jack up your vehicle or to remove any lug nuts when installing this wheel liner set.
1. Remove the factory hub covers from the wheels.
2. Install the front liner on to the wheel then the factory hub cover.
3. Secure the hub cover and liner with the black lug nut covers provided.
4. Install the rear liner then the factory hub cover. On the rear hub cover, the four (4) tabs must line up with the four (4) oval tabs on the wheel liner.
5. Secure the hub cover and liner with the black lug nut covers provided.
6. DO NOT use a power wrench on plastic lug nut covers.
Installation is complete!

Picture shows 1/2 set, 1 Front & 1 Rear plus hardware. Each box contains complete set for 4 wheels.

SOLD ONLY IN FULL SETS